Advanced search

274 search results

Page 15 out of 28 Pages

  • Volvo Penta: Process for Prop Calculations Question
    Answer: Hello:   Attached is an example of the process for doing the prop calculations.   So if you wanted to have your boats top speed be 20 knots, then ...
  • Volvo Penta: Volvo Penta AD41D Diesel Injector Question
    Answer: Volvo Penta AD41D dieselNeed to know the difference between your two parts listed as injectors for the Volvo Penta AD41D diesel: 861103 and 3803238 which run ...
  • Volvo Penta: Volvo Penta KAD42P-A Head Bolt Reuse Question
    Answer: Volvo Penta KAD42P-AWould like know how many times you can reuse the headbolts Thank you,  C. ********************************* Hello:   By the manual you are not supposed to use the headbolts more ...
  • Volvo Penta: Volvo Part 854934 Now 21389074 Question
    Answer: Hello Sir:   Attached is a diagram of the upper unit of the sail drive.  Ref. 70 is the big rubber seal that is squeezed between the ...
  • Volvo Penta: Mounting Kit Question
    Answer: Hello Sir:   The mounting kit in this diagram is the rubber gasket that goes on the outside of the boat against the hull.  It has the hole ...
  • Volvo Penta: Volvo Penta 3.0 1999 Riser Question
    Answer: Hello Sir:   Attached is a Volvo Penta schematic showing that your 3.0 1999 engine uses a riser 3857798,    The attachment showing 3857798 shows the Volvo Penta system page ...
  • Volvo Penta: Volvo 165 (1000 HP), ZF or Twin Disc Gear similar to ZF 550A Question
    Answer: Howdy JD, I called you regarding a freewheeling screw (ZF550A) while the other engine/screw is rotating approx. 4.5 knots for about an hour. I called ...
  • Prop: QL Line of Props Question
    Answer: Hello:You have the QL line of props (a hub and prop 41102353 and 41102310).  These are no longer supported as QL has gone out of ...
  • Part Number Questions: Contents of Kit 21676083
    Answer: Hello:   This kit has two part numbers in it.   1)        Two Disc kits (21357719)  - attached is a picture of the discs. 2)        And the upgrade oil kit 21551779.     Since purchasing ...
  • Part Number Questions: 838310 Replaced by 855872 Question
    Answer: Hello Sir:Your power steering pump 838310 has been superceeded to a new pump number 855872. BUT you must use your old pulley and hub from your old ...

The most popular searches are: