PROPELLERS - VOLVO PENTA

GENUINE
VOLVO PENTA PROPS
Aluminum & Stainless Steel
EVERY PROPELLER DISCOUNTED!
FREE GROUND SHIPPING
ON ALL PROPS UNDER 15 lbs

Back to Marine Parts Express Home

SINGLE PROPS FOR SX DRIVES
SINGLE PROPS (SX): HIGH PERFORMANCE
SP PROPELLERS FOR 200, 250, 270 280, 290 SP DRIVES
HIGH SPEED / STANDARD PROPS FOR 200, 250, 270 280, 290 SP DRIVES
DUOPROPS, DUOPROP TOOL
DP-S, DP-D, DP-E, DP-X, DP-A, DP-B DUOPROPS
PROPELLERS FOR S-DRIVE (VOLVO PENTA SAILDRIVES)
QL PROPELLERS WITH INTERCHANGEABLE HUBS FOR OUTBOARDS AND STERNDRIVES

Don't know what drive you have? Use our Drive Finder

Don't let this happen to you!

Our own Sales Engineer Fred Sidelinger pointing to a huge chunk one customer had to cut away from his stainless steel prop just to remove it! Prop grease is a bargain--you know what they say about an ounce of prevention? How about 25 grams of prevention? 828250 (small tube)

Want to make prop replacement easier? Order Volvo Penta Propeller Shaft Grease (Part No. 1141644)
When used to mount your prop, it makes prop pulling a breeze!
500g container (about a pint). Also available in single application 25 gram size. (Part No. 828250)

Don't know what size your prop is? We have Volvo's guide to prop sizing right here.
Did you know that you should carry an extra propeller in your boat for emergencies? Most boat owners are surprised when they learn that the cost for towing a boat can be significantly more than that for towing a car. The fact is that most sea-tow operators want between $300 and $400 to show up and $200 per hour thereafter. You can avoid this expense if the reason for the tow is a broken prop. Take the time now to buy a spare!

Worried about whether that expensive prop you just bought might get stolen? Want to lock your outdrive in place with special theft-resistant nuts? We sell McGard lock kits designed specifically for Volvo Penta props (SX, DP, and DP-S) and the SX or DP-S outdrives.

We have a great article on propping your boat in our newletter!
Let us know if you need the nut to go with your prop and we will order the right one for you.
Please call us for great pricing on any prop you do not see listed

Simple Single Prop guide:
Please call us (877-621-2628) for other boat and drive specifications. Propping can be complicated!

Motor HP	Gear Ratio	Approximate Boat Length
Motor HP	Gear Ratio	Thru 17'	18' - 21'	22' - 25'	Houseboats / Barges
110-145	1.35:1	14 x 15
	1.62:1	14 x 17	14 x 15	14 x 15
	2.15:1	14 x 19	14 x 17	14 x 17	15 x 13
150 - 185	1.35:1	14 x 17	14 x 17	15 x 13
	1.61:1	14 x 21	14 x 21	15 x 17	15 x 15
	1.89:1	14 x 19	14 x 19	15 x 15	15 x 13
190 - 255	1.35:1	14 x 21	15 x 19	15 x 17	16 x 13
	1.61:1	14 x 23	16 x 17	16 x 17	16 x 13
230 - 260	1.61:1	14 x 23	14 x 23	15 x 21
290	1.61:1	14 x 23	14 x 23	14 x 21

Downloadable PDF for Long hub / Short (Standard) Installation Components

SINGLEPROP, PROPELLERS FOR SX DRIVES

ALUMINUM

DIAMETER	PITCH	LEFT-HAND ROTATION	RIGHT-HAND ROTATION
14.25	21	-	3817469
14.25	23	-	3850303
14.5	19	3855481	3817468
15	15	-	-
15	16	-	-
15	17	3855480	3850300
15.5	12	3855476	-
15.5	13	3855477	3850298
15.5	14	3855478	-
15.5	15	3855479	3850299

STAINLESS STEEL, POLISHED

DIAMETER	PITCH	LEFT-HAND ROTATION	RIGHT-HAND ROTATION
14.75	17	3860714	3862462
14.75	19	3860715	3860708
14.75	21	3860716	3860709
14.25	23	3860717	3860710

SP PROPELLERS FOR 200, 250, 270 280, 290 SP DRIVES

ALUMINUM

V6 and V8 engines should always be fitted with the long hub which is also suitable for 4 cylinder petrol engines.

Order a long hub cone (a.k.a. nut) to go with this type of propeller.
The long hub depth to the end of the shaft is 5.375".
The long hub prop width is 4.5".

Click on the picture at left to enlarge

35 - 854045 Prop cone
35A - 854047 Spacer Washer
36 - 897367 Washer
37 - 839354 Plug
38 - 955974 O-ring
39 - 850889 Screw
39A - 850888 Washer

Contact us if you need other parts not listed.

DIAMETER	PITCH	LEFT-HAND ROTATION	RIGHT-HAND ROTATION
14	17	854977	854992
14	19	854978	854993
14	21	854979	854994
14	23	854980	854995
15	15	854981	854996
15	17	854982	854997
15	19	854983	854998
15	21	854984	854999
16	9	854985	-
16	13	854986	872000
16	15	854987	872001
16	17	854988	872002
16	19	854989	872003
16	21	854990	872004
16	23	854991	872005

SHORT HUB STANDARD PROPELLERS FOR 200, 250, 270 280, 290 SP DRIVES

ALUMINUM
STD = Standard Propeller
HS = High Speed

Order a short hub (standard) washer or cone (a.k.a. nut) to go with this type of propeller.
The short hub depth to the end of the shaft is 4.705".
The short hub prop width is 3.83".

DIAMETER	PITCH	LEFT-HAND ROTATION	RIGHT-HAND ROTATION
14	13	813284 STD	813285 STD
14	15	814626 HS	814631 HS
14	17	814627 HS	814632 HS
14	19	814628 HS	814633 HS
15	11	813296 STD	813297 STD
15	13	813316 STD	813317 STD
15	15	814611 HS	814615 HS
15	17	814612 HS	814616 HS

DUOPROPS

Don't know what drive you have? Use our Drive Finder

	FOR YOUR CONVENIENCE: We sell a special Volvo Penta tool to help you remove and remount duoprops. This special tool helps you remove the forward propeller nut. A, B, and C series duoprop tool: 873058 D and F series duoprop tool: 3855516 E series duoprop tool 885195 X series duoprop tool 3862797 and 3862808

Prop tool specially produced for
Marine Parts Express by a Swiss manufacturing company
Works for DP-A, B, C, D, E, G, DP-S, XDP and DP-H.
(stainless steel no less!)

$125.00
Replaces 3862797
Call to order

3888918 Prop Puller Tool (description)

To remove stuck Volvo Penta DP-S, DPS-A sterndrives that use
the D and F series props.

(Important: Duoprop propellers with different size codes must never be mounted on the same drive.)

(Click here to see our list of refurbished props available at a 50% discount)

TYPE A ALUMINUM PROPELLERS FOR DP280, 290 DRIVES
Especially designed for the increased torque of diesel engines.

Order a 20 mm shaft cone (a.k.a. nut) to go with this type of propeller.
Order a 16 mm shaft cone (a.k.a. nut) to go with this type of propeller.

DIM	DUOPROP SET (PAIR)	SINGLE: LEFT-HAND ROTATION (FRONT/FORE)	SINGLE: RIGHT-HAND ROTATION (REAR/AFT)
A0	872270	872259	872264
A1	854764	854774	854784
A2	854765	854775	854785
A3	854766	854776	854786
A4	854767	854777	854787
A5	854768	854778	854788
A6	854769	854779	854789
A7	854770	854780	854790
A8	854771	854781	854791
A9	854772	854782	854792
A10	854773	854783	854793

TYPE B ALUMINUM PROPELLERS FOR DP280, 290, DP-A, DP-B, DP-D, DP-E DRIVES

DIM	DUOPROP SET (PAIR)	SINGLE: LEFT-HAND ROTATION	SINGLE: RIGHT-HAND ROTATION
B1	854814	854822	854830
B2	854815	854823	854831
B3	854816	854824	854832
B4	854817	854825	854833
B5	854818	854826	854834
B6	854819	854827	854835
B7	854820	854828	854836
B8	854821	854829	854837

TYPE C STAINLESS STEEL PROPELLERS FOR DP280, 290, DP-A, DP-B, DP-D, DP-E DRIVES

Order a 20 mm shaft cone (a.k.a. nut) to go with this type of propeller.
Order a 16 mm shaft cone (a.k.a. nut) to go with this type of propeller.

DIM	DUOPROP SET (PAIR)	SINGLE: LEFT-HAND ROTATION	SINGLE: RIGHT-HAND ROTATION
C2	3860877	3860602	3860603
C3	3860878	3860604	3860605
C4	3857495	3857461	3857465
C5	3857496	3857462	3857466
C6	3588226	3857463	3857467
C7	3857498	3857464	3857468

TYPE D ALUMINUM PROPELLERS FOR DP-S DRIVES

DIM	DUOPROP SET (PAIR)	SINGLE: LEFT-HAND ROTATION	SINGLE: RIGHT-HAND ROTATION
D0	3851480	3851420	3851440
D1	3851481	3851421	3851441
D2	3851482	3851422	3851442
D3	3851483	3851423	3851443
D4	3851484	3851424	3851444
D5	3856365	3856345	3856355
D6	3856366	3856346	3856356
D7	3856367	3856347	3856357

TYPE E STAINLESS STEEL PROPELLERS FOR DPX DRIVES

DIM	DUOPROP SET (PAIR)	SINGLE: LEFT-HAND ROTATION	SINGLE: RIGHT-HAND ROTATION
E2	3860065	872422	3860011
E3	3860066	872423	3860012
E4	3860067	872424	3860013

TYPE F STAINLESS STEEL PROPELLERS FOR DP-S DRIVES

DIM	DUOPROP SET (PAIR)	SINGLE: LEFT-HAND ROTATION	SINGLE: RIGHT-HAND ROTATION
F2	3857563	3857557	3857558
F3	3857564	3857559	3857560
F4	3851494	3851464	3851474
F5	3851495	3851465	3851475
F6	3851496	3851466	3851476
F7	3851497	3851467	3851477
F8	3851498	3851468	3851478
F9	3851499	3851469	3851479

TYPE G NICKEL-ALUMINUM-BRONZE ALLOY PROPELLERS FOR DP-H DRIVES
Featuring full electric isolation for no growth and excellent corrosion resistance.

DIM	DUOPROP SET (PAIR)	SINGLE: LEFT-HAND ROTATION	SINGLE: RIGHT-HAND ROTATION
G2	3587375	3587386	3587388
G3	3587378	3587389	3587390
G4	3587379	3587391	3587392
G5	3587380	3587393	3587394
G6	3587381	3587395	3587397
G7	3587382	3587398	3587399
G8	3587383	3587400	3587401
G9	3587384	3587402	3587403
G10	3587385	3587404	3587405

TYPE GR STAINLESS STEEL PROPELLERS FOR DP-R DRIVES
Made in stainless steel for speeds above 35 knots.

DIM	DUOPROP SET (PAIR)	SINGLE: LEFT-HAND ROTATION	SINGLE: RIGHT-HAND ROTATION
GR7	3863492	3863501	3863502
GR8	3863493	3863503	3863504
GR9	3863494	3863505	3863506

TYPE X COMPOSITE PROPELLERS FOR XDP or DP-S DRIVES

DIM	DUOPROP SET (PAIR)	FRONT PROP ASSEMBLY	FRONT BLADE	FRONT CAP	REAR PROP ASSEMBLY	REAR BLADE	REAR CAP
X3	3861626	3861613	3861590	3861604	3861614	3861591	3861603
X4	3861627	3861615	3861592	3861604	3861616	3861593	3861603
X5	3861628	3861617	3861594	3861604	3861618	3861595	3861603
X6	3861629	3861619	3861596	3861604	3861620	3861597	3861603
X7	3861630	3861621	3861598	3861604	3861622	3861599	3861603
X8	3861631	3861623	3861600	3861604	3861624	3861601	3861603

PROPELLERS FOR S-DRIVE (VOLVO PENTA SAILDRIVES)

Volvo Penta's S-drive propellers for 110S and 120S are manufactured of aluminum and bronze alloys, developed to withstand salt water and cavitation damage. The propellers are manufactured to a high and consistent quality under rigid quality controls.

Engine Model	Diameter x Pitch	Folding Two-Blade Prop	Two-Blade Prop	Three-Blade Prop
MD2010	14 x 8	3858507	853346
MD2020	14 x 11		3583867	851419
	15 x 9	3858508
	15 x 11		3583868
	16 x 11		850342
MD2030	14 x 12			850659
	16 x 11	3858510
	16 x 13		852116
MD2040	17 x 12			873369
MD2040	17 x 14	3858512	852510
D2-55	17 x 16			3583577
D2-55	17 x 17		3583578
D2-75	18 x 16			889659
D2-75	19 x 17		889658
MD22L	17 x 15			873368
MD22L	17 x 16		853583
MD22	17 x 12			873369
MD22	17 x 14		852510
MD5A	14 x 6	3858506
MD5A	14 x 7		860261
MD5C, 2001	14 x 8	3858507	853346
MD5C, 2001	14 x 9		850341
MD7A	14 x 9		850341	850658
MD7A	15 x 9	3858508
MD7B, 2002	14 x 11			851419
	14 x 12			850659
	15 x 9	3858508
	16 x 11		850342
MD11C	14 x 12			850659
	15 x 9	3858508
	16 x 11		850342
MD11D, 2003	15 x 13			850672
	16 x 11	3858510	850342
	16 x 13		852116
MD17C	15 x 13			850672
MD17C	16 x 11	3858510
MD17D	17 x 13	3858511		852117
MD17D	17 x 14		852510
MD21	15 x 12			851988
MD21	16 x 11			852017
2003T	17 x 14			853588
2003T	17 x 16		853583

The QL Aluminum Propeller with Interchangeable hub

Interchangeable hub with perfect shaft alignment and no balance problems. Innovative torsion rods absorb shock when hitting a rock thus protecting your engine; the hub can be changed in minutes. The propeller comes in 3- or 4-blade configuration to suit most applications and is made in squeeze casted aluminum. A 3-blade propeller offers top speed performance, while a 4-blade prop provides maximum thrust and smooth cruising operation.

(Note: all props are right hand rotation unless otherwise specified.)

For complete propeller installation, choose both an Interchangeable Hub and a Propeller Blade set.

Step 1: Choose the hub kit
HP Range	Applications	Prop series	Hub Kit Number
Evinrude/Johnson
40-75	Small gear case	C	41102353
45-140	Large gear case	D	41102354
90-300	E-Tec, 15 tooth spline	E	41102355
Honda
35-50	91-94, 95 & Newer	C	41102362
75-130	98 & Newer	D	41102351
135-225	02 & Newer, 15 tooth spline	E	41102364
Mercury/Mariner
25-70	99 & newer, big foot	C	41102350
60-140	01 & newer, 4-stroke	D	41102351
135-300	All years 225 HP	E	41102352
Mercruiser / Sterndrive
Alpha One	135-300 HP	E	41102352
Bravo One	1988 & newer	E	41102352
OMC Sterndrive
Model 800 Cobra / King Cobra	15 tooth spline	E	41102355
Cobra SX, 1995 & newer	19 tooth spline	E	41102361
Suzuki
40-65	DF40, DF50, 99 & newer	C	41102356
60-140	DF60, DF70, 98 & newer	D	41102357
150-225	DT150, 200, 225, 96 & newer	E	41102358
Tohatsu/Nissan
35-70	87-98	C	41102359
60-140	87 & newer	D	41102360
Volvo Penta Sterndrives
	SX Sterndrive, 94 & newer, 19 tooth spline	E	41102361
Yamaha
40-60	F40, F50, F60	C	41102362
60-130	99 & newer, 4-stroke	D	41102363
150-300	84 & newer, 4 stroke, 15 tooth spline	E	41102364
Sterndrive	3.0 L - 7.4 L	E	41102364
Step 2: Choose the Propeller Blade Set from the correct series (listed above)
C Series Prop Blades
Blades	Diameter	Pitch	Part Number
3	11	15	41102300
3	11.1	13	41102301
3	11.1	14	41102302
3	11.4	12	41102303
3	11.6	11	41102304
3	12	17	41102305
3	12.1	9	41102306
3	12.25	15	41102307
3	12.5	13	41102308
4	10.5	13	41102309
4	10.5	14	41102310
4	10.8	12	41102311
4	11.1	11	41102312
4	11.4	10	41102313
4	11.8	9	41102314
D Series Prop Blades
3	14	11	41102315
3	13.75	13	41102316
3	13.5	15	41102317
3	13.25	17	41102318
3	13	19	41102319
3	13	21	41102320
4	13.25	13	41102321
4	13	15	41102322
4	12.75	17	41102323
4	12.5	19	41102324
4	12.5	21	41102325
E Series Prop Blades
3	15	15	41102326
3	14.8	17	41102327
3	14.5	19	41102328
3	14.3	21	41102329
3	14.2	23	41102330
4	14.75	15	41102331
4	14.5	17	41102332
4	14.25	19	41102333
4	14	21	41102334
4	14	23	41102335
Questions? Call 877-621-2628 back to Marine Parts Express home