Add new FAQ
Do you have a pipe elbow for 3K K26 turbocharger?
Hello: We probably can do this for you, but can you give me the model number and/or serial number of the engine. While the K26 turbocharger is made ...
Do you have something like an engine block heater made specifically for the Volvo Penta 5.7 GXi-F?
Hello:There is nothing available for marine engines.Some of the local fishermen up here in Maine use an automotive block heater that plugsinto 110V shore power ...
DIY flushing system question
Hello: I am sorry, but I don’t follow what you are asking. I think you might mean the DIY flushing system. If so the whole kit is ...
D2-55A filter question
Hello Sir:The D2-55A when they first came out used to use the 3581621 filters which were the same filters that the earlier MD22 series engines ...
DPS, DPS-A, and the SX drives Cylinder Question
Hello:The kit we have and the repair kit number 3854247 is for the cylinders on a DPS and the SX drives. I don't have a kit ...
DP-E Drive Hose Attachment Question
Hi JD, it seems clear that the engine ending in 3702 did come with my boat when the fellow I bought it from purchased it ...
D2-55A PN 21951374 Now 877418 Question
Can you please tell me if the wear kit for a D2-55A #21951374 superceeds or is replaced by a new # because it is showing ...
Discontinued Volvo XDP Question
Hello:As you probably know these XDP have been discontinued by Volvo Penta.However, I have two almost brand new drives. These were on a new boat ...
DP-S Sleeve between Upper/Lower Drive Question
Hello: I will send you another schematic showing the sleeve between the upper and the lower drive, but you should take a hold of the UV joint ...