Advanced search

59 search results

Page 4 out of 6 Pages

  • Sterndrives: Will the Garden Hose Engine Flush kit work with my 1999 Volvo Penta 4.3GL PBYC
    Answer: Sure.  It will work with your engine.   You will have to measure the diameter of the water hose (the hose that goes from transom shield to ...
  • Volvo Penta: I need a gimbal ring #3856987 but cannot find it. What do I do?
    Answer: The gimbal ring 3856987 used to come with the housing (3857979) with the 1" water line.Eventually Volvo Penta stopped using the 1" water line  housing ...
  • Volvo Penta: I have a V5 7GXIDP 4012032888 Chaparral 265 551 and I need to replace the
    Answer: These 5.7 GXI engines are no longer available from Volvo Penta.  GM, who used to make the blocks, is no longer manufacturing them.  I would need ...
  • Volvo Penta: Volvo Penta 2002 question
    Answer: Hello:If you have a 2002 with a serial number below 2300046825 then you need to go with 21134777 pump and the new pipe 840001.If you ...
  • Mercruiser: Mercruiser 47-86462A-1 obsolete
    Answer: Hello Sir:I am sorry to tell you that 47-86462A-1 is no longer available from Mercruiser.Mercruiser recommends that you replace the whole pump with a 466-9410A-1.  ...
  • Volvo Penta: Oil questions
    Answer: Hello:On the oil question I have three thoughts.1)  Any chance that someone has overfilled this drive a bit?  It happens all time.  I would drain ...
  • Propeller: Calculating Prop Size Question
    Answer: Hello:Attached is a quote for a new ZF15MIV 2.955:1 ratio (the 2.718 ratio is the same price).The 4.108 engine is a 51 HP at 4000 ...
  • Volvo Penta: Volvo MD2040 Seals Question
    Answer: Hello Mr Neeson,i have 2 Volvo MD2040 with  Volvo saildrives on my catamaran . The engines are 13 years old (2300 hours each) and i ...
  • Volvo Penta: 838310 Replaced by 855872 Question
    Answer: Hello Sir:Your power steering pump 838310 has been superceeded to a new pump number 855872. BUT you must use your old pulley and hub from your old ...
  • Mercruiser: Corrosion Control on Sail Drives Question
    Answer: I am considering a sail drive installation with a folding al bronze propeller. I want to understand the galvanic corrosion engineering better. I understand the ...

The most popular searches are: