MPE Header

GARDEN HOSE ENGINE FLUSH PROJECT

Estimated time, start to finish: 1 hour
What you get: Flush kit for gas engines, allows you to run your engine while connected to a 3/4" garden hose. Hose connects to the blue cap in the picture. This is a standard feature on recent Volvo Penta gas engines.
Cost of parts: $24.15
Parts required:
(please note there are different parts depending on your engine hose diameter)
While Volvo Penta does not sell this as a kit, we have determined that these are the parts you will need: 3862656 (Cap), 3862082 (Retainer), 3862079 (Gasket), 3807440 (Flushing connection), 978174 (hose clamps, you need two), 982645 (more hose clamps, also quantity two), 3857823 (hose) clamp (3862891) screw (formerly 3853557 but now expired as of 6/1/2011--you will need to supply your own screw #7 in the diagram) and 3862699 (T-pipe for 1" pipe). Just to be clear: don't try to order the expired screw online, the shopping cart will allow you to do it, but then our parts department will call you to tell you it is no longer available.
If you have a 1-1/4 in. engine pipe: then you need a different T-pipe, 3589415 and 2 larger clamps: 3853786.

Copyright © Marine Parts Express. All rights reserved.